Since we built the filter with your health & safety in mind, it’s crafted from food-grade, impact-resistant BPA/BPS-free material. It’s sturdy enough to handle daily use and light enough to make your life easier.

And the best part? No power needed. No need to worry about finding a spot near an outlet. Fits seamlessly into your space. 

The frequency depends on water usage and the quality of your water source.

As a general guideline, the top (Stage 1 - Ceramic) & bottom (Stage 3 - Mineral Stones) generally last 1 year while the middle (Stage 2 - KDF) needs changing 6-8 months.

Regular checks are essential. If you notice a change in taste, it might be time for a swap. These are designed to be a breeze to replace, ensuring your water stays crisp and refreshing.

Click here to buy Replacement Cartridges.

To ensure our tap water is 'safe' to drink, authorities add a chemical disinfectant called chlorine. Chlorine kills harmful bacteria such as E.Coli and Giardia as well as other pathogens that can harm your health. 

While this disinfectant creates 'safe' drinking water, chlorine is not healthy to drink. It can damage healthy gut flora, raise the potential risk of cancer, and give water a poor taste and odour.

Additionally, water can pick up contaminants along the way from the water treatment plant to your home. Heavy metals and other impurities can leach into the water supply from old pipes and industrial & agricultural activity. Heavy metals like lead, cadmium and mercury are toxins that pose a risk to your health in the long run.

HolyH2O™ Trinity Filter System filters out 99.99% of chlorine, heavy metals, industrial chemicals and 85+ other contaminants — so you get clean, healthy, great-tasting water.

Absolutely! The HolyH2O™ Trinity Water Filter comes full and ready to go, it includes all 3 filters.

Please refer to the step-by-step instructions here:

https://youtu.be/YEYtMDjLQLY

Step 1: Unboxing and Cleaning

- Carefully unbox your new Trinity Water Filter.
- Clean all plastic parts with warm water and dishwashing liquid.

Step 2: Preparing Filters

- Remove the different filters from their boxes.
- Place these filters in a bucket or sink to soak overnight.

Step 3: Assembling the Unit

- Place the base on a flat surface and position the large bottom tank on top.
- Attach the tap to the bottom tank, ensuring one seal on the inside and one on the outside to prevent leaks.

Step 4: Placing Filters

- Put the Mineral Stone Filter (stage 3) in the middle of the bottom tank.
- Screw the cartridge filter (stage 2) into the white divider, placing the divider on top of the bottom tank.
- Attach the ceramic dome filter (stage 1) to the top tank and secure it in place with the screw.

Step 5: Finalizing Assembly

- Position the top tank on top of the divider.
- Fill the top tank.

Step 6: Leak Check

- Inspect for any leaks.
  - If water rushes through the ceramic dome filter, ensure it is securely screwed in place.
  - If there is a leak around the tap, verify the installation of both seals, ensuring they sit flush with the tank.

Note:
It's normal for the initial filtration to be slow as water needs to pass through the top filter. (It is crafted from densely compressed ceramic diatoms)

Once you have completed the set up & keep the tank topped up, you shouldn't have a problem.

Eventually, the flow rate will be ~ 1L/hr

The top ceramic filter can be cleaned under cool running water with a mesh scrubber, scouring pad or an old soft-bristle toothbrush.

We recommend draining the system annually & using dishwashing liquid with warm water to sanitize the body. 

Dry all parts with a clean paper towel & reassemble as shown here:

https://youtu.be/YEYtMDjLQLY

The product is designed to recreate water from a fresh mountain stream ✨

Many of our customers have reported that water from the Trinity Filter System tastes and feels 'smoother' than tap water. This is likely due to the addition of beneficial trace minerals in the water, which provide a “smooth” taste.

You can use it for drinking, cooking, and to make better-tasting coffee and tea.

Have a special someone who you think needs this product in their life?

You can ship any HolyH2O™ product directly to that lucky person by entering their address as the shipping address, and your own as the billing address.

Plus, we don’t include value invoices inside the box as receipts are sent directly to your email address. It’s that easy!

*Please note: Since we use external fulfillment partners, we are unable to include messages in the package - we’re sorry!

Any unused filter system can be returned for a full refund up to 100 days - no questions asked.

If the product has been used but you're not satisfied with your purchase, please reach out to our friendly support team & we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.

The HolyH2O™ Trinity Filters are sent from our warehouse in Sydney, New South Wales. 

All orders are dispatched within 24 hours of you placing your order and come with free express delivery to all metro areas, Australia-wide.